If you add storage for GTA VI on PS5, buy a 1 TB or larger PCIe Gen4 NVMe drive that is sold with a heatsink. PlayStation tells players to clear a minimum of 212GB for the game, and Sony's own rules decide which drives the console accepts. The four drives below all list PS5 compatibility on the maker's pages. We have not tested any of them; this page compares published specs against Sony's requirements. For the size question itself, see the GTA 6 file size and storage guide.
What Sony requires
Sony's support page lists these requirements for a PS5 expansion drive:
- Interface: PCIe Gen4 x4 M.2 NVMe, Key M (Socket 3). M.2 SATA drives are not supported.
- Capacity: 250 GB to 8 TB.
- Speed: 5,500 MB/s sequential read or faster is recommended.
- Form factor: 2230, 2242, 2260, 2280 or 22110. Most drives you will see are 2280.
- Cooling: a heatsink or similar cooling structure is required, and single-sided and double-sided drives both work.
- Size with cooler: up to 25 mm wide and 11.25 mm thick in total (8.0 mm above the board, 2.45 mm below it). Sony warns that heatsink sizes vary a lot, so check the fit before buying.
A drive with a large motherboard-style heatsink may not fit. Drives sold with a heatsink made for the PS5 slot remove most of that risk.
How much space each size leaves
The table is our arithmetic: the drive's nominal capacity minus 212GB, the minimum PlayStation says to clear. It is not an install size, a patch may add to it, and the console shows a little less than the nominal figure after formatting.
| Drive size | Left after 212GB | Roughly how many 212GB games fit |
|---|---|---|
| 500 GB | About 288 GB | 2 |
| 1 TB | About 788 GB | 4 |
| 2 TB | About 1,788 GB | 9 |
| 4 TB | About 3,788 GB | 18 |
The base PS5 ships with 1 TB of built-in storage and the Digital Edition with 825 GB, per PlayStation. A 1 TB expansion drive doubles the first and more than doubles the second. Buy 2 TB if you already keep two or three other very large games installed; buy 500 GB only if the price gap to 1 TB is small, since the saving is rarely worth the squeeze.
Four drives that list PS5 support
| Drive | Sizes listed | Published speed | Heatsink and fit | PS5 statement |
|---|---|---|---|---|
| WD_BLACK SN850P for PS5 | 1 TB shown on the product page; check it for other sizes | Maker says speeds exceed Sony's minimum; no figure read | Custom heatsink made for the PS5 airflow | "Officially licensed for PlayStation 5" |
| Samsung 990 PRO with Heatsink | 1 TB and 2 TB on the page read | 7,450 MB/s read, 6,900 MB/s write (2 TB) | Integrated heatsink; dimensions not on the page | Titled "PS5 Compatible" |
| Lexar NM790 with Heatsink | 1 TB, 2 TB, 4 TB | Up to 7,400 MB/s read, 6,500 MB/s write | 80 x 24 x 9.7 mm in total | "Compatible with PlayStation 5" |
| Seagate FireCuda 530 Heatsink | 500 GB, 1 TB, 2 TB, 4 TB | Up to 7,300 MB/s read | Pre-installed heatsink, 9.84 to 11.04 mm high depending on size | "Compatible with PS5 consoles" |
Every drive here is rated above Sony's 5,500 MB/s recommendation. Treat the speed column as a maker's rating: Lexar says its figures come from its own testing and are not PS5 benchmarks, and a console will not necessarily reach a drive's top speed.
Who each drive suits
WD_BLACK SN850P is the pick if you want the drive Sony has formally licensed. The maker's PS5 sheet says it is made for the console, which is the closest thing to a guarantee of fit.
Samsung 990 PRO with Heatsink suits buyers who want a well-known brand and the highest read speed listed among the drives with a figure here. Samsung's page gives no heatsink dimensions, so check the 11.25 mm limit against the listing for the exact model before you order.
Lexar NM790 with Heatsink is the drive where the published numbers are easiest to check: Lexar lists 9.7 mm total height, comfortably under Sony's limit, and sells a 4 TB size.
Seagate FireCuda 530 Heatsink has the widest size range, including 500 GB. Its data sheet dates from 2021, and the 4 TB version is 11.04 mm high, close to the 11.25 mm limit. Seagate says the heatsink is pre-installed and should not be removed.
How to choose
- Pick the size first. Work out what you keep installed. If GTA VI is your main game, 1 TB is enough; if you rotate large games, 2 TB saves deleting and re-downloading.
- Choose a drive sold with a heatsink. It meets the cooling requirement and removes the guesswork.
- Compare the height. Anything at or under 11.25 mm in total passes Sony's limit. If a maker gives no height, look for a PS5 compatibility line on its own page.
- Then compare price per GB. The listed speeds are all above Sony's recommendation, so the price decides. Check the current price at the shop; we do not quote prices here because they change.
- Check the install steps. Fitting a drive means opening the console's slot cover, and Sony's support page covers installation.
Before you buy
Pre-load opened on 10 November and the game is now out, so you may already have cleared space on the internal drive to install it. You can fit a drive afterwards; Sony's support page covers installation. The pre-load guide covers the PS5 install steps, and the pre-load size tool compares the requirement with your free space.